Inverse gas chromatographic investigation of the effect of hydrogen in carbon monoxide adsorption over silica supported Rh and Pt–Rh alloy catalysts, under hydrogen-rich conditions

Selective CO oxidation (SCO) has attracted scientific and technological interest due to its application to the operation of proton electrolyte membrane fuel cells (PEM-FCs). CO adsorption, being an elementary step of SCO, is studied over silica supported monometallic Rh and Rh0.50 + Pt0.50 alloy catalysts, under various hydrogen atmospheres, namely: 25% H2 + 75% He, 50% H2 + 50% He and 75% H2 + 25% He carrier gas mixture compositions. The investigation of CO adsorption is done by utilizing reversed-flow gas chromatography (RF-GC). As a result rate constants for the adsorption (k1), desorption (k−1) and irreversible CO binding (k2) over the studied catalysts as well as the respective activation energies are determined. The variation of the rate constants and the activation energies against the nature of the used catalyst (monometalic or alloy) and the amount of hydrogen in the carrier gas gives useful information for the selectivity as well as the activity of CO oxidation over group VIII noble metals. At low temperatures and under H2-rich conditions compatible with the operation of PEM fuel cells the activity of the monometallic and the alloy catalysts is expected to be similar, however the selectivity of Rh0.50 + Pt0.50 alloy catalyst is expected to be higher, making Pt–Rh alloy catalyst as a better candidate for CO preferential oxidation (PROX). The low energy barrier values found in the present work, most likely are referred to high surface amounts of CO. The desorption barriers determined are in any case much lower than the respective activation energies found for CO desorption in the absence of hydrogen indicating a H2-induced desorption, which can explain the observed in the literature rate enhancement of SCO oxidation.