Modelling and simulation of a wireless microsensor data acquisition system using PCM techniques

This paper presents a review of developed simulated models for a wireless data acquisition system. The system reads analogue information provided by two sensors used for medical purposes. The real data have been recorded by two, pH and pressure sensors used in diagnosing conditions of the esophagus that are employed to examine the system performance. The created model contains four main simulated units using SIMULINK. The first unit contains the output signal, which is encoded to digital signal based on adapting one of the pulse coding modulation (PCM) algorithms. The second unit simulates the processor function that is responsible for framing, mixing and compressing the incoming bit streams from both sensors. The third unit, where the digital data are modulated and sent through different noisy channels, represents an efficient FSK transmitter/receiver model. At the receiver end, the signal is demodulated and processed inversely to extract the original analogue signal read by the two sensors. s work, the performance of the systems using different PCM methods will be studied comparatively in order to control the transmission and reduce the amount of data frames sent. This will lead to a significant reduction in power consumption. In addition, the performance of the RF unit through additive White Gaussian noise (AWGN) channel was examined by estimating the average bit error rate (BER) for different carrier frequencies. The effect of the multipath fading, inband/outband interference, and adjacent channel power ratio (ACPR) has also been investigated during system assessment.