Heat transfer in HCCI multi-zone modeling: Validation of a new wall heat flux correlation under motoring conditions

The present study focuses on the development and a preliminary validation of a heat transfer model for the estimation of wall heat flux in HCCI engines via multi-zone modeling. The multi-zone model describes heat flow between zones and to the combustion chamber wall. Mass, species and enthalpy transfer, which affect the temperature field within the combustion chamber, are also considered between zones, accounting for the convective heat transfer terms. The multi-zone heat transfer model presented herein has been developed for HCCI combustion simulation and although it has been used in the past, its validation was based on cylinder pressure data under firing conditions. In the present study a more accurate validation of the model is conducted. This is achieved by comparing the multi-zone model heat loss rate predictions to the corresponding predictions of a validated CFD code. The cases examined correspond to actual motoring cases, against which the CFD code has been validated in a previous work. Moreover, a sensitivity analysis is presented, to assess the effect of the zone configuration, i.e. zone thickness and number, on the predicted heat loss rate and temperature profiles. In addition, a comparison is made between the results obtained from the proposed heat flux correlation and one in which the temperature gradient at the wall is approximated via finite differences.