Delayed ettringite formation (DEF) in mortars of white cement

In this study white cement CEM I-52.5 and white limestone cement CEM II-LL, A and B, with 15% and 25% limestone substitution, were studied. The way delayed ettringite forms, due to exposure to high temperatures (50 °C) and external sulphate attacks, was examined in the mortar samples. rtars were immersed at 50 °C for 180 days in: (a) a saturated Ca(OH)2 solution and (b) a 5% Na2SO4 solution. During the experiment’s duration, the mortar samples were being observed visually on a regular basis while their expansion was estimated on a weekly basis by measuring the change of length with a micrometer. At the end of the experiment, the mortar samples’ compressive strength was determined and the deterioration products were identified through means of X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM-EDAX), Thermogravimetry (TG) and Infra-Red Spectroscopy (FT-IR). ding it is evident that the amount of ettringite is proportional to the C3A content of cement. Sulphates amount in cement is the controlling factor for heat induced ettringite formation since when they are consumed the reaction stops. On the other hand in the case of external sulphate attack another important controlling factor is the compressive strength of the cement; the higher compressive strength the lower the risk of expansion. Finally, in the case of external sulphate attack, limestone, when added to cement, was proved to enhance the durability against sulphates attack when compared to a cement of the same class.