Fire tests on bonded post-tensioned concrete slabs

The results from eight fire tests conducted on bonded post-tensioned one-way spanning concrete slabs are presented in this paper. The fire tests were augmented with two additional tests at ambient temperature, carried out to failure on slabs with identical geometry and prestressing tendons. The different structural response between using plastic and metallic ducts, Limestone and Thames Gravel aggregates, and different axial restraint conditions to longitudinal thermal expansion, have been highlighted. Slabs with Thames Gravel aggregates were shown to have a much higher deflection compared to slabs with Limestone aggregates, with restrained slabs having a lower vertical deflection compared to equivalent unrestrained slabs. In all the fire tests, cracks directly inline and parallel to the tendons occurred due to thermal stresses at relatively low tendon temperatures, which were not observed in the ambient tests. It is shown that the use of plastic ducts resulted in slightly higher tendon temperatures due to the ease at which water migrated from the grout once the duct had melted. The fire tests have shown that the fire resistance specified in current codes of practice are generally conservative for bonded post-tensioned one-way spanning concrete slabs. The tests have provided detailed experimental data in the form of temperature distributions within the slab, vertical and horizontal displacements and strains in the tendons, which will allow validation of future computer models to predict the behaviour of bonded post-tensioned concrete slabs under fire conditions.