Strength deterioration of reinforced concrete beam–column joints subjected to cyclic loading

This paper proposes a method to predict the ductile capacity of reinforced concrete beam–column joints failing in shear after the development of plastic hinges at both ends of the adjacent beams. After the plastic hinges occur at both ends of the beams, the longitudinal axial strain at the center of the beam section in the plastic hinge region is expected to increase abruptly because the neutral axis continues to move toward the extreme compressive fiber and the residual strains of the longitudinal bars continue to increase with each cycle of additional inelastic loading cycles. An increase in the axial strain of the beam section after flexural yielding contributes to a widening of the cracks in the beam–column joints, thus leading to a reduction in the shear strength of the beam–column joints. The proposed method includes the effect of longitudinal axial strain of a beam in the plastic hinge region of the beam on the joint longitudinal strain and the strength deterioration of the joint. In order to verify the shear strength and the corresponding deformability of the proposed method, test results of RC beam–column assembly were compared. Comparisons between the observed and calculated shear strengths and their corresponding deformability of the tested assemblies showed reasonable agreement.