Electrochemical properties of air electrodes based on MnO catalysts supported on binary carbons

An alkaline air electrode with a ball-milled γ -MnO 2 catalyst was prepared and studied. The electrochemical performance of air electrode composed of MnO 2 supported on CNT/BP2000 (1:1) two carbons for oxygen reduction reaction (ORR) was investigated by using the linear polarization method, Tafel analysis, galvanostatic discharge method, and AC impedance spectroscopy. The surface morphologies of CNT and the active layer of the air electrode were also investigated by SEM. Experimental results indicated that air electrodes with MnO 2 supported on CNT and BP2000 carbons showed excellent electrochemical properties. A multiple spray technique was used to prepare the air electrode. The amount of loading of catalyst carbon slurry (MnO 2 supported on CNT/BP2000 binary carbons) on the active layer varied from 0.60 to 3.63 mg/cm 2 . The electrochemical performance of air electrodes with MnO 2 catalyst and with two catalysts of KMnO 4 and MnO 2 was compared and discussed. The air electrode with a low-cost MnO 2 catalyst shows a highly potential candidate for application on metal–air battery or micro-fuel cell.