Enhancement of the hydrogen storage characteristics of Mg by reactive mechanical grinding with Ni, Fe and Ti

Mg-10wt%Ni-5wt%Fe-5wt%Ti powder was prepared by reactive mechanical grinding using a planetary ball mill. The Mg-10wt%Ni-5wt%Fe-5wt%Ti powder exhibited high hydriding and dehydriding rates even at the first cycle, and its activation was completed after two hydriding–dehydriding cycles. After the reactive mechanical grinding, the particle size of the powder was reduced, as compared with those of the starting materials. The hydrogen storage properties were measured at temperatures of 473 K, 573 K and 623 K. The activated Mg-10wt%Ni-5wt%Fe-5wt%Ti powder absorbed 5.31 wt% and 5.51 wt% of hydrogen for 5 min and 1 h, respectively, at 573 K under 12 bar H2. It desorbed 5.18 wt% of hydrogen at 573 K under 1.0 bar H2 for 1 h. The initial hydrogen absorption rate increased when passing from 473 K to 573 K, but decreased at 623 K. The hydrogen desorption rate increased rapidly with increasing temperature from 473 K to 623 K. The hydrogen storage capacity was about 6.72 wt% at 573 K.