Adsorption of D(H) atoms on Ar ion bombarded (0 0 0 1) graphite surfaces

Adsorption of thermal (2000 K) D (H) atoms on HOPG surfaces prior to and after bombardment with 500 eV Ar ions was studied with thermal desorption and vibrational spectroscopies. Ion bombardment of HOPG generates vacancy (VD, displaced surface C atoms) and interstitial (ID, Ar captured between 1st and 2nd C plane) defects. These defects remove the ability of the surface to adsorb D like on virgin HOPG surfaces and to form Cgr–D bonds. After a dose of 0.1 Ar per C surface atom, D adsorption is markedly suppressed. Annealing of bombarded surfaces at 1350 K, connected with desorption of trapped Ar and removal of ID, recovers a large fraction of the adsorption capacity for D. Therefore, the long range stress in the surface plane introduced by ID must be responsible for a significant fraction of D adsorption blocking. It is suggested that ID prevent reconstruction of the C surface which is required for the formation of Cgr–D bonds. For ion doses above 0.5 Ar/C, adsorption of D on the surface is negligible. After annealing at 1350 K, D can be adsorbed in quantities comparable to the virgin HOPG surface, however forming C–D bonds which are similar to those observed in hydrogenated amorphous carbon instead of those which are normally formed on HOPG. Instationary etching via release of deuterocarbon species occurs primarily in the C1 and C2 channels. It is only observed at bombarded HOPG prior to annealing and probably due to the presence of isolated C1 and C2 species on the surface generated upon VD formation.