Investigation of the intra-particle sintering kinetics of a mainly agglomerated alumina powder by using surface area reduction

An alumina precursor was prepared by the aluminium sulphate (0.20 M) and excess urea reaction in boiling aqueous solution. The precursor was calcined at 900 °C for 2 h and then δ-Al2O3 powder having volumetric agglomeration degree of 80% was obtained. Cylindrical compacts having diameter of 14 mm were prepared under 32 MPa by axial pressing using oleic acid as binder. Each compact was fired isothermally at various temperatures between 950 and 1400 °C. The firing time was changed from zero to 2 h. The fired compacts were examined by scanning electron microscopy (SEM) and nitrogen adsorption techniques. The specific surface areas (S/m2 g− 1) of the samples were calculated using the Brunauer, Emmett, and Teller (BET) procedure. The rate constant (k) and mechanism-characteristic parameter (n) were obtained for different temperatures between 950 °C and 1150 °C from the application of the neck-growth sintering rate (NGRM) model on the surface area reduction data. An Arrhenius equation and the parameter n for the sintering were found in the forms of k = (7.648 × 106 h− 1) exp (− 186,234 J mol− 1 / RT) and n = 4.0 × 10− 7 T3–1.7 × 10− 3 T2 + 2.3 T − 1030.8 respectively. The parameter n changes in the interval 0.61 <  n < 1.34 with rising temperature having maximum at about 1025 °C. Based on the SEM images and NGRM data, the intra-particle sintering was discussed.