Title of article :
Montmorillonite intercalated by ammonium of octaaminopropyl polyhedral oligomeric silsesquioxane and its nanocomposites with epoxy resin
Author/Authors :
Liu، نويسنده , , Hongzhi and Zhang، نويسنده , , Weian and Zheng، نويسنده , , Sixun، نويسنده ,
Issue Information :
دوهفته نامه با شماره پیاپی سال 2005
Pages :
9
From page :
157
To page :
165
Abstract :
The octaammonium chloride salt of octaaminopropyl polyhedral oligomeric silsesquioxane (OapPOSS) was synthesized via the hydrolytic condensation of γ-aminopropyltrimethoxysilane in the methanol solution catalyzed by concentrated hydrochloric acid and was further used as the intercalating agent to modify sodium montmorillonite (MMT). X-ray diffraction (XRD) data indicate that the MMT was successfully intercalated by the ammonium of OapPOSS, as evidenced by the fact that the basal spacing of MMT galleries was expanded from 1.3 to 1.7 nm. The intercalation method used here introduced only the octaammonium POSS salt in contrast to the introduction of all hydrolyzed products from γ-aminopropyltriethoxysilane (APTEOS). The POSS-modified MMT was exploited to prepare the epoxy-MMT nanocomposites. Using a two-step technique, the disorderly exfoliated epoxy-MMT nanocomposites were obtained. XRD studies showed that the formation of the nanocomposites in all the cases with the disappearance of the peaks corresponding to the basal spacing of MMT. Transmission electronic microscopy (TEM) was used to investigate the morphology of the nanocomposites and indicates that the nanocomposites are comprised of a random dispersion of intercalated/exfoliated aggregates throughout the matrix. Differential scanning calorimetry (DSC) indicates that the glass transition temperatures of the as-prepared epoxy-MMT nanocomposites remained invariant in comparison with that of the control epoxy when the POSS-MMT content is less than 10 wt%. However, the nanocomposite containing 15 wt% of POSS-MMT displayed a decreased Tg, which could be attributed to the incomplete curing reaction resulting from the POSS-MMT loading. Thermogravimetric analysis (TGA) shows that the incorporation of POSS-MMT into epoxy networks displayed an apparent improvement in the thermal stability, and the char residue increased with increasing the concentration of POSS-MMT.
Keywords :
Montmorillonite , POSS , Epoxy Resin
Journal title :
Polymer
Serial Year :
2005
Journal title :
Polymer
Record number :
1722517
Link To Document :
بازگشت