Compatibilization of PP/elastomer/microsilica composites with functionalized polyolefins: Effect on microstructure and mechanical properties

The morphology and mechanical properties of polypropylene/elastomer/silica composites were investigated with the aim of improving stiffness and impact resistance. Two different types of silica were tested: Precipitated silica and polymer grade microsilica (silica fume). The composites were compatibilized with commercial polypropylene and polyethylene containing maleic anhydride functionality as a means of controlling their microstructure and ultimately their mechanical properties. Comparisons were made with surface coated silica and hydroxyl-functionalized copolymers prepared with metallocene catalysts. The effect of adding the polymeric compatibilizers was assessed by morphology studies, thermal analysis and mechanical testing. Significant improvements in impact strength were obtained by tailoring the microstructure of polypropylene/elastomer/microsilica composites. With introduction of PP-g-MAH as compatibilizer, stiffness was enhanced simultaneously with impact strength. DSC curves of crystallization provided evidence to support the formation of different microstructures.