Analysis and optimization of the HVOF process by combined experimental and numerical approaches

Thermal spraying with the HVOF technology is a well known approach to dense metallic, ceramic and cermets coatings with good mechanical properties. Any attempt for improving HVOF coating properties requires a fundamental understanding of the mechanisms that occur during HVOF spraying. Thermal spray processes are not only optimized by empirical testing and by correlation analysis between process parameters and coating properties but also with numerical approaches. Recent attempts to understand the momentum and heat transfer mechanisms between flame and particles, and thus improve the control of the thermokinetic deposition process by analysis of fundamental thermophysical and fluid mechanical processes, have led to computational modeling of the spraying process and verification of simulation results by in-flight particle analysis. aper focuses on modeling (tracking) of the particle properties during HVOF spraying using alumina powder. The particle properties are sensitive to a large number of process parameters (e.g., gas temperature, gas expansion velocity, pressure, spraying distance, spray powder particle diameter, nozzle geometry, etc.). Variation of the operating parameters of the HVOF process (gas flow rates, stoichiometric oxy/fuel ratio, nozzle design, etc.) is performed during modeling and simulation. The SprayWatch® system for particle in-flight measurement is used for verification of the numerical analysis result.