Atmospheric plasma spraying of yttria-stabilized zirconia coatings with specific porosity

The interdependence between plasma spray process parameters and porosity of YSZ coating microstructures was investigated with simultaneous consideration of the deposition efficiency. Based on a factorial experimental plan, the argon plasma gas flow, the current, the interaction of argon flow and current, and the spray distance for the Triplex II plasma gun were found to yield the main contributions to porosity as well as to deposition efficiency. f these three process parameters has a significant individual effect on the in-flight particle velocities and temperatures. The contribution to the effects on porosity arises almost exclusively from the particle temperature. Regarding the deposition efficiency, the larger contribution originates from the particle velocity. ieve a targeted high porosity at reasonable deposition efficiency a simple linear regression model was applied yielding an argon flow of 50 slpm and a current of 470 A at a spray distance of 200 mm as the optimum parameter set. The average particle temperature estimated for this optimum is just above the melting temperature. At this setting, a porosity of 17.7% and a deposition efficiency of 32.5% may be expected. reater spray distance and lower power density (lower current and/or higher argon plasma gas flow) the deposition efficiency was observed to drop considerably. The cooling of the particles here becomes critical, i.e. the particles are only partly molten. This was verified by an analysis of the density distributions of measured in-flight particle temperatures.