Forest biomass waste combustion in a pilot-scale bubbling fluidised bed combustor

Combustion experiments of forest biomass waste in a pilot-scale bubbling fluidised bed combustor were performed under the following conditions: i) bed temperature in the range 750–800 °C, ii) excess air in the range 10–100%, and iii) air staging (80% primary air and 20% secondary air). Longitudinal pressure, temperature and gas composition profiles along the reactor were obtained. mbustion progress along the reactor, here defined as the biomass carbon conversion to CO2, was calculated based on the measured CO2 concentration at several locations. It was found that 75–80% of the biomass carbon was converted to CO2 in the region located below the freeboard first centimetres, that is, the region that includes the bed and the splash zone. on the CO2 and NO concentrations in the exit flue gas, it was found that the overall biomass carbon conversion to CO2 was in the range 97.2–99.3%, indicating high combustion efficiency, whereas the biomass nitrogen conversion to NO was lower than 8%. ning the Portuguese regulation about gaseous emissions from industrial biomass combustion, namely, the accomplishment of CO, NO and volatile organic compounds (VOC) (expressed as carbon) emission limits, the set of adequate operating conditions includes bed temperatures in the range 750°C–800 °C, excess air levels in the range 20%–60%, and air staging with secondary air accounting for 20% of total combustion air.