Harvesting productivity and costs when utilizing energywood from pine plantations of the southern Coastal Plain USA

For woody biomass to make a significant contribution to the United Statesʹ energy portfolio, harvesting contractors must economically harvest and transport energywood to conversion/processing facilities. We conducted a designed operational study in the Coastal Plain of North Carolina, USA with three replications of three treatments to measure harvesting productivity and costs when utilizing woody biomass. The treatments were: a conventional roundwood only harvest (control), an integrated harvest in which merchantable roundwood was delivered to mills and residuals were chipped for energy, and a chip harvest in which all stems were chipped for energy use. The harvesting contractor in this study typically delivers 2200–2700 t of green roundwood per week and is capable of wet-site harvesting. Results indicate that onboard truck green roundwood costs increased from 9.35 $ t−1 in the conventional treatment to 10.98 $ t−1 in the integrated treatment as a result of reduced felling and skidding productivity. Green energy chips were produced for 19.19 $ t−1 onboard truck in the integrated treatment and 17.93 $ t−1 in the chip treatment. Low skidding productivity contributed to high chip costs in the integrated treatment. Residual green biomass was reduced from 18 t ha−1 in the conventional treatment to 4 and 3 t ha−1 in the integrated and chip treatments, respectively. This study suggests that until energywood prices appreciate substantially, loggers are unlikely to sacrifice roundwood production to increase energywood production. This research provides unique information from a designed experiment documenting how producing energywood affects each function of a harvesting system.