Formability and properties of self-standing clay film by montmorillonite with different interlayer cations

Influences of exchangeable interlayer cations were investigated on self-standing film formability, film morphology, and properties of the clay films such as flexibility and gas barrier property. Ion-exchanged montmorillonite samples were prepared by a cation exchange from naturally bearing cation, mostly Na+, to Li+, Mg2+, Ca2+, Al3+, and Fe2+, 3+. Self-standing films were prepared from aqueous colloidal dispersions of these montmorillonite samples with no additives. The montmorillonite samples with monovalent or divalent cation formed flat self-standing films while the Al-montmorillonite sample produced a distorted film. The Fe-montmorillonite sample formed many separated reddish-brown rod-shaped pieces. Clay film microstructures were different with interlayer cations. The films with monovalent interlayer cations were constructed by the stacking of units with delicately waved thin clay sheets in the whole film, but other films show different morphologies between the upper side and lower side; the upper side is laminated with thin sheets; the lower side is laminated with large thick sheets. lf-standing films’ flexibility and gas barrier property differed according to the interlayer cations. These properties were good in cases of samples with monovalent cations. The innumerable short wave and sheet thinness are considered to foster good flexibility and gas barrier properties. The differences in film formability and properties of the films are attributable to different swellability among samples with different interlayer cations. The montmorillonite samples with monovalent cations swell sufficiently by water, but those with polyvalent cations swell poorly. In the latter case, clay crystals aggregate in water, then the aggregate grows into large particles, creating a film with large particles.