Papermaking potential of rapeseed straw, a new agricultural-based fiber source

The main papermaking characteristics of rapeseed straw (Brassica napus L.) as an agricultural residue were investigated. The average fiber length, width, lumen, and cell wall thickness were found to be 1.03 mm, 28.00 μm, 19.1 μm, and 4.91 μm, respectively. Cellulose, lignin, holocellulose, acetone-soluble extractives and ash content were determined as 41.66, 16.00, 78.9, 1.63, and 3.46%, respectively. Soda and soda-anthraquinone (AQ) pulping were conducted using 16, 18, and 20% sodium hydroxide and 0.2% AQ in soda-AQ pulping, based on oven-dried straw, cooking temperatures of 175 and 185 °C, cooking times of 40 and 70 min, and liquor-to-straw ratio of 8:1. The results showed that lower Kappa number, higher screened pulp yield, and improved bonding strength properties were obtained in the soda-AQ pulping at even 2% less alkali consumption as compared to the soda process. In general, the pulp strength characteristics of rapeseed straw were comparable to those of hardwoods and short-fiber non-wood plants.