Title of article :
Evaluation of Removal Efficiency of Cr (VI) Ions from Aqueous Solution Using Chitosan
Author/Authors :
0، 0 0 نويسنده Department of the Environment, College of Basic Sc Sobhanardakani, Soheil , 0، 0 0 نويسنده Young Researchers & Elite Club, Hamedan Branch, Is Zandipak, Raziyeh , 0، 0 0 نويسنده Department of Fisheries, College of Agriculture & Bonyadi, Mohadeseh , 0، 0 0 نويسنده Young Researchers & Elite Club, Hamedan Branch, Is Parvizimosaed, Hassan , 0، 0 0 نويسنده Department of Fisheries, Jouybar Branch, Islamic A Moslemi, Mehran , 0، 0 0 نويسنده School of Public Health, Kerman University of Medi Tahergorabi, Mahsa Tahergorabi , 0، 0 0 نويسنده Department of the Environment, Faculty of Natural Hosseini, Seyed Mehdi
Issue Information :
فصلنامه با شماره پیاپی 0 سال 2015
Pages :
1
From page :
0
To page :
0
Abstract :
In this research, chitosan was used for the removal of Cr (VI) ions from aqueous solution. The effect of parameters like solution pH, initial Cr (VI) concentration, agitation time, amount of adsorbent and agitation speed on the adsorption process was studied. The experimental equilibrium data were analyzed by using various models such as Langmuir and Freundlich. Freundlich isotherm model fitted well with data. In addition, the experimental data was fitted to kinetic models including the pseudo-first-order and pseudo-second-order and based on calculated respective parameters such as rate constants, equilibrium adsorption capacities and correlation coefficients. The removal process follows the pseudo-second-order kinetic model. The results suggest that chitosan could be employed as a low-cost material for the removal of Cr(VI) ions from aqueous solutions.
Abstract :
In this research, chitosan was used for the removal of Cr (VI) ions from aqueous solution. The effect of parameters like solution pH, initial Cr (VI) concentration, agitation time, amount of adsorbent and agitation speed on the adsorption process was studied. The experimental equilibrium data were analyzed by using various models such as Langmuir and Freundlich. Freundlich isotherm model fitted well with data. In addition, the experimental data was fitted to kinetic models including the pseudo-first-order and pseudo-second-order and based on calculated respective parameters such as rate constants, equilibrium adsorption capacities and correlation coefficients. The removal process follows the pseudo-second-order kinetic model. The results suggest that chitosan could be employed as a low-cost material for the removal of Cr(VI) ions from aqueous solutions.
Journal title :
Journal of Chemical Health Risks
Serial Year :
2015
Journal title :
Journal of Chemical Health Risks
Record number :
1987068
Link To Document :
بازگشت