Title of article :
INVESTIGATING DISPERSION AND RHEOLOGICAL BEHAVIOR OF IONICALLY STABILIZED AQUEOUS Α-ALUMINA SUSPENSION
Author/Authors :
ESTILI، M. نويسنده , , Paydar، M. H. نويسنده Materials Science and Engineering Department, School of Engineering, Shiraz University, Shiraz, Iran , , Bahrololoom، M. E. نويسنده Materials Science and Engineering Department, Shiraz University, Shiraz, Iran ,
Issue Information :
فصلنامه با شماره پیاپی 7 سال 2005
Abstract :
Dispersion and rheological behaviors of ionically stabilized aqueous alpha alumina
suspensions were investigated in various pH values (3, 11) and solid volume fractions (4, 7, 10,
15) Vol? using sedimentation experiment as well as viscosity measurement. Interface separating
porous-packed sediment from a relatively clear supernatant at pH 11 was measured over 20
hours with the aim of obtaining linearity range, initial settling velocity, final sediment height and
suspension sensitivity factor, whilst it failed to be observed in the case of pH 3 for its turbid
supernatant. Thus, the final sediment level instead of interface location was taken into
consideration. For all solids loading, final sediment level in the case of pH 3 was smaller than
those in pH 11. The interface was observed to be moving downward in a linear fashion, with the
steady drive toward an equilibrium state, which was substantiated to be pH and solid loading
dependent. As ? increased, linearity time changed in an ascending order. pH 11 suspensions
showed good agreement with the well-known Richardson-Zaki equation and displayed dramatic
variations in initial settling velocity, whilst it was not the case for pH 3 as understood generally by
turbidity observations. In addition, pH and ? appeared to be more effective in giving stability to
the suspending systems. On the other hand, rheological behaviors of these suspensions were taken
into consideration for better indication of suspension stabilization degree in which suspension
yield stress derived using viscosity values was focused. The results showed that ?y at pH 3 is much
lower than that of at pH 11. This is a further indication of better dispersion at pH 3. It was also
found that for all ? values, pH 3 suspensions were more stable than the flocculated pH 11 ones.
Journal title :
Iranian Journal of Materials Science and Engineering
Journal title :
Iranian Journal of Materials Science and Engineering