Sonoelectrochemical recovery of silver from photographic processing solutions

This paper describes the effect of ultrasound upon the electrochemical recovery of silver from photographic processing solutions using a newly designed electrochemical cell – SonoEcoCell. Rates of deposition of silver (obtained potentiostatically) were studied in the model ‘fix’ solutions (dilute aqueous Na2S2O3/NaHSO3 at a stainless steel cylinder electrode in both the absence and the presence of ultrasound. Under silent conditions, the magnitude of the cathodic potential is a major factor in the removal of silver. Under 20 kHz sonication, the rate of deposition of silver increases with increasing ultrasonic intensity. The cathode efficiency is also enhanced under insonation. The position of the ultrasonic probe with respect to the rotating cylinder electrode (RCE) was studied. It was found that for a ‘face-on’ geometry (probe parallel to the electrode) led to higher rate constants compared with a ‘side-on’ geometry (probe perpendicular to the electrode). The effect of coupling an RCE with ultrasound upon these rate constants employing the two geometry was also investigated. It was found that, employing either the face-on or the side-on geometry alone, improved rate constants were obtained below approximately 1500 and 2000 rpm, respectively.