Optimization of ultrasonic extraction of 23 elements from cotton

Optimization of ultrasonic extraction of 23 elements from cotton was performed with different solvent volume ratios. For this purpose nitric acid, hydrochloric acid and water were mixed and applied in a mixture for the extraction of elements adsorbed on cotton material. The elements chosen for the extraction procedure (Al, As, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, Hg, K, Mg, Mn, Mo, Na, Ni, Pb, Sb, Si, Sn, Tl and Zn) were those that are important in textile processing. Some of them cause problems during fiber processing, dyeing or bleaching. The removal of elements from the processed fabric can be successfully done with ultrasonic extraction in the ultrasonic bath. Extraction procedure was optimized by software package Design Expert 6 (DX6) and the optimum of ultrasonic extraction was achieved with the mixture of 1 M HCl–1 M HNO3–H2O = 3.32/2.83/93.85 (v/v). Ultrasonic extraction was a fast and efficient extraction procedure easily applied on cotton textile material.