Evaluation of the breakdown behaviour of ATLAS silicon pixel sensors after partial guard-ring removal

To avoid geometrical inefficiencies in the ATLAS pixel detector, the concept of shingling is used up to now in the barrel section. For the upgrades of ATLAS, it is desired to avoid this as it increases the volume and material budget of the pixel layers and complicates the cooling. ct planar edge-to-edge arrangement of pixel modules has not been possible in the past due to about 1100 μ m of inactive edge composed of approximately 600 μ m of guard rings and 500 μ m of safety margin. In this work, the safety margin and guard rings of ATLAS SingleChip sensors were cut at different positions using a standard diamond dicing saw and irradiated afterwards to explore the breakdown behaviour and the leakage current development. found that the inactive edge can be reduced to about 400 μ m of guard rings with almost no reduction in pre-irradiation testability and leakage current performance. This is in particular important for the insertable b-layer upgrade of ATLAS (IBL) where inactive edges of less than 450 μ m width are required.