Spectroscopy of high rate events during active interrogation

Pulsed accelerators are being used for radiographic inspections in homeland security applications. Adding spectroscopic detection capability enables additional information to be extracted but challenges signal processing hardware. This work compares two approaches to cost-effective digital spectroscopy systems designed to handle these high rate scenarios. In the first system, the signal from a PMT is directly digitized and then deconvolved on a PC using standard techniques. Bypassing the preamplifier, this system can handle high count rates (>106 cps) from an LaCl3 detector with no dead time and an energy resolution of 5% at 1.33 MeV. Spectra acquired from fission product gamma rays between interrogation pulses are shown. At higher rates, this approach is limited by the DAQ transfer rate to the PC. Instead, we tested a fast ADC (125 MSPS) and an FPGA that performed onboard, real-time digital signal processing (DSP). The energy spectrum is generated on the FPGA board during the measurement and transferred later. This system was tested in nuclear resonance fluorescence (NRF) experiments. Resonance peaks from NRF reactions are shown.