Light-emitting electrochemical cells and light-emitting diodes based on ionic conductive poly(phenylene vinylene): a new chemical sensor system

Red-orange light-emitting electrochemical cells (LECs) based on poly[1,4-(2,5-bis(1,4,7,10-tetraoxaundecyl))phenylene vinylene] also named poly[2,5-bis (triethoxy-methoxy)-1,4-phenylene vinylene], (BTEM-PPV) are fabricated and characterized. BTEM-PPV combines good electronic conductivity with ionic conductivity in the oxidized and reduced state due to its conjugated backbone and oligo(ethylene oxide) attached as side chains. When applying this polymer in LECs one obtains devices of moderate brightness and with fast response times. This high performance is achieved without blending an additional ionic conductive polymer into the film. The response time of such devices driven with square waveform voltage pulses was determined to be 480 μs. The turn-on voltage for electroluminescence occurs at 2 V and at 3 V a brightness of about 35 cd/m2 was obtained. Due to the covalent linkage of glyme like side chains to the PPV backbone, BTEM-PPV, complexed with metal ions, shows an ionochromic effect in the absorption spectra and also in the electroluminescence spectra, which can be a new approach to chemical sensors.