Title of article :
The determination of interface states and series resistance profile of Al/polymer/PEDOT-PSS/ITO heterojunction diode by I–V and C–V methods
Author/Authors :
?ahing?z، نويسنده , , R. and Kanbur، نويسنده , , M. Tesmer and H. J. Voigt ، نويسنده , , M. and Soykan، نويسنده , , C.، نويسنده ,
Issue Information :
دوماهنامه با شماره پیاپی سال 2008
Pages :
5
From page :
727
To page :
731
Abstract :
The forward and reverse bias capacitance–voltage (C–V) and conductance–voltage ( G / w – V ) characteristics of Al/polymer/PEDOT-PSS/ITO heterojunction diodes have been investigated in the frequency range of 10 kHz to 5 MHz at room temperature. The obtained C–V and G / w – V characteristics of these diodes at various gate biases show fairly large frequency dispersion especially at low frequencies and forward bias due to surface states Nss in equilibrium with the polymer semiconductor and series resistance Rs. These observations indicate that at low frequencies, the charges at interface states can easily follow an ac signal and yield an excess capacitance and conductance. In addition, the forward and reverse bias current–voltage (I–V) characteristics of Al/polymer/PEDOT-PSS/ITO heterojunction diode were measured at room temperature. The main diode parameters such as barrier height ΦB0, ideality factor n and average series resistance Rs obtained from the forward bias ln I–V characteristics were found as 0.53 eV, 4.79 and 195 Ω, respectively. Experimental results show that both Nss and Rs values should be taken into account in determining frequency and voltage-dependent I–V, C–V and G / w – V characteristics.
Keywords :
Heterojunction diode , Polyp , Organic nanometric thin film , frequency dependent , Polymer , Series resistance
Journal title :
Synthetic Metals
Serial Year :
2008
Journal title :
Synthetic Metals
Record number :
2084655
Link To Document :
بازگشت