Effect of sputtering pressure and annealing temperature on the properties of indium tin oxide thin films

Indium tin oxide (ITO) thin films were deposited on glass substrates by RF sputtering system at different sputtering pressure (SP) (20–34 mTorr) and room temperature. The sputtering pressure effects on the deposition rate, electro-optical and structural properties of the as-deposited films were systematically investigated. The optimum sputtering pressure of 27 mTorr, giving a good compromise between electrical conductivity and optical transmittance was found to deposit films. The films were heat-treated in vacuum (200–450 °C) and their electro-optical and structural properties investigated with temperature. A criterion factor Q, which is the ratio between the normalized average transmission to normalized resistivity was defined. It has been observed that Q has its maximum value for heat treatment at 400 °C and the X-ray diffraction (XRD) and scanning electron microscopy (SEM) analysis proves the films have preferred crystal growth towards (2 2 2) direction and average size of grains are 35–40 nm.