Evolution of precipitated phases during prolonged tempering in a 9%Cr1%MoVNb ferritic–martensitic steel: Influence on creep performance

Ferritic–martensitic steels of the 9%Cr1%Mo type have been extensively used in power plant components, heat exchangers, piping and tubing, etc., due to an excellent combination of properties such as creep resistance, toughness and resistance to oxidation at high temperatures. In these steels the stabilizing role of MX carbonitrides (M = Nb, V; X = C, N) is one of the main factors responsible for the resistance under creep conditions. The control of precipitation and coarsening of MX phases during prolonged, high temperature tempering or post-weld heat treatment is then a key point to obtain the desirable microstructure and hence, to achieve high temperature resistance under service conditions. present contribution we report the evolution of the precipitated phases during heat treatment at 780 °C for increasing times in the range 40 min to 7 h for an ASTM A213 T91 steel. The Nb and V contents in solid solution were determined as a function of the time of treatment and maxima were observed for 5 and 5.66 h, respectively. Creep tests to rupture were also conducted at 600 °C – 190 MPa for as-treated specimens. A maximum creep rate was observed to occur in coincidence with the maximum values of Nb and V contents in solid solution. We suggest possible relationships between the observed second phase evolution and the creep resistance behavior.