Architecture of a multipurpose simulator

This paper presents the development of a multipurpose simulator with the general model describing a four-component, three-phase (oil, aqua, gas), multi-dimensional, finite-difference polymer injection simulator. The model uses a block-centered grid and a seven-point finite-difference scheme. Fluid saturations and pressure distributions are obtained from a fully implicit formulation using Newtonʹs method, whereas polymer concentration is obtained, in a subsequent step, explicitly using the method of cascade. Practical features of the present simulator include: (1) a truly multipurpose simulation; and (2) ease of preparing a batch data file required for the simulator. A novel and simple procedure is implemented to reduce the general model of the polymer injection simulator (polymer, oil, aqua, and gas) to: (1) three-phase black-oil simulator (oil, water, and gas); (2) two-phase black-oil simulators (oil and water, oil and gas, or water and gas); (3) two-phase polymer injection simulator (polymer, oil, and aqua); and (4) one-phase simulators (oil, water, or gas) with only the relevant equations being solved at the matrix level for each simulator. Guidelines for other practical features are also presented. mulator was tested and verified using a polymer injection test problem and a gas injection bench mark test problem both reported in the literature. The simulator was also used to model a field case and some results are highlighted.