The ability of agricultural tyres to distribute the wheel load at the soil–tyre interface

Bigger tyres with lower inflation pressure at equivalent wheel loads are expected to reduce the stresses transmitted to the soil. We measured the contact area and the vertical stress distribution near the soil–tyre interface for five agricultural implement tyres at 30 and 60 kN wheel load and rated inflation pressures. Seventeen stress transducers were installed at 0.1 m depth in a sandy soil at a water content slightly lower than field capacity and covered with loose soil. The recently developed model FRIDA was successfully fitted to the experimental stress data across the footprint. The contact area reflected the size of the tyres. The small tyres had identical contact area at the two loads, while it increased with load for the two biggest tyres. The small tyres presented uneven stress distributions with high peak stresses. Across the tests, the tyre inflation pressure described well the measured peak stress as well as the modelled maximum stress. The latter seems to be appropriate in evaluating vehicle trafficability. We found significant differences among tyres for the slope of a linear regression between the mean ground pressure and the inflation pressure, while the tyres displayed the same interception on the mean ground pressure axis. Our results therefore suggest that the slope of this relation is the most sensitive expression of tyres’ ability to deflect and transfer stresses to the soil. The two small tyres performed poorer in this respect than the larger tyres. Tests were limited to one soil strength, with future research directed toward a broader spectrum of soil strengths.