Acid mine drainage treatment through a two-step neutralization ferrite-formation process in northern Japan: Physical and chemical characterization of the sludge

The acid mine drainage of a closed iron sulphide mine in northern Japan was treated on-site using a continuous flow bench scale plant. In the bench scale plant of the two-step neutralization ferrite-formation process, magnesium oxide or calcium carbonate was used during the first neutralization step to raise the pH to around 4.8 to produce aluminium hydroxide sludge. In the second neutralization step sodium hydroxide was applied to reach a pH of 8.5 to produce ferrite sludge. Initial settling rates of the produced aluminium and ferrite sludge were from 1.2 to 4.8 times higher than the initial settling rates of the sludge produced by the treatment plant currently operated at the mine. The suspended solids (SS) concentration in the sludge ranged from 1.0 to 11.8 times higher than the SS concentration in the sludge produced by the current facility. The sludge volume index (SVI) of aluminium sludge was 11 and 36 mL/g when produced with magnesium oxide or calcium carbonate, respectively. The SVI of ferrite sludge was 4 mL/g regardless of the type of neutralizer used in the first neutralization, while the same parameter (SVI) of the sludge produced by the current facility is 70 mL/g, which indicates that the two-step neutralization ferrite-formation process generates sludge with much higher density. In addition, the process effectively reduced the concentration of toxic heavy metals from above 800 ppb, 13 ppm, and 15 ppm to as low as 1.4 ppb, 0.02 ppm and 0.2 ppm for arsenic, copper, and zinc, respectively.