Froth recovery measurements in an industrial flotation cell

The froth phase serves an important role in upgrading the final concentrate in flotation. At present, the techniques that are used in the mineral industry to determine the effect of froth phase on the metallurgical performance of plant scale flotation cells have limitations. m of this paper is to investigate the performance of the froth in an industrial flotation cell. A unique device has been developed which is able to decouple the froth zone from the pulp zone. The device consists of two concentric tubes. The inner tube acts as a dropback collection chamber or catcher. The particles that return from the froth phase fall directly into the catcher and are collected as froth dropback. This technique is capable of measuring plant scale flotation cell froth recovery as well as providing valuable information on froth dropback particles. oth recovery measurements were carried out in a rougher bank of a copper concentrator treating sulphide minerals. The dropback device is designed so that it can be immersed into an industrial size flotation cell and plant froth recovery measurements can be taken at any given location. During the experiments, the bubbles laden with valuable mineral particles entered the device from the flotation cell, subsequently rising to form a froth layer at the top of the device. The particles that detached or drained from the froth zone were collected in the dropback collection chamber whereas the concentrate sample was collected through a launder. By sizing and chemical analysis of the concentrate and dropback samples, the froth recovery was estimated on the basis of the valuable component. The effect of air rate on the froth recovery was also investigated. Metallurgical grades of the froth dropback device samples for different particle size ranges were compared to those of the concentrator to better understand the froth dropback mechanism.