Simulation of sediment motions using a discrete particle model in the inner surf and swash-zones

A volume-of-fluid Navier–Stokes solver (RIPPLE) was used to simulate inner surf and swash zone flow with a 3 s wave period and wave height of 0.14 m on a planar, 1:10 sloping beach (Iribarren number of 1.0). In addition to other hydrodynamic information, RIPPLE was used to provide high-resolution predictions of the pressure gradient and fluid velocity in the horizontal and vertical dimensions that served as forcing to a discrete particle model (DPM). Sediment transport processes in the inner surf and swash zones were simulated for a thin veneer of sediment particles over a 5 m test section in the DPM. Coupling between RIPPLE and the DPM was one-way such that particle–particle and fluid–particle interactions in the DPM did not provide feedback to alter the flow predicted by RIPPLE. The numerical simulation showed strong sediment suspension localized under vortices that reach the bed. Interestingly, the bulk of the sediment located in the small-scale vortex originated from locations nearly 0.2 m landward. These findings suggest that (1) sediment motion for a single swash event can be significant, (2) that sediment measured in suspension likely originates from locations other than the bed directly below the suspension plume suggesting the importance of sediment advection and (3) that sparse cross-shore measurements in the field will only sporadically capture localized suspension events.