An investigation of the repetitive failure in an aircraft engine cylinder head

Cylinder head (CH) failures in aircraft piston engine may have serious or fatal consequences to the safety of the crew and the aircraft. Moreover, when failure becomes undoubtedly repetitive and critical resulting in loss of aircraft, destruction of properties, and first and foremost loss of human lives, the cause of the failure requires to be investigated using a scientific approach. Therefore, the aim of this study is to investigate and identify the root cause of a repetitive premature failure in an aircraft engine CH. ston engine of the training aircraft Utva-75 has malfunctioned during the flight due to the cracking of its aluminum cast CH. It has been the second engine failure of this type of aircraft due to the cracking in the CH in a very short span of time. From the visual examination of the mating fracture surfaces, it has been possible to observe typical beach and ratchet marks indicating the occurrence of fatigue failure. The crack has initiated from multiple origins located on the inner flange fillet on the exhaust side of the CH. Further examinations by using scanning electron microscopy as well as energy dispersive spectroscopy and metallography have shown that the fatigue had promoted from pre-existing material defect due to a high concentration of shrinkage pores at the initiation crack site and can be most likely associated with the manufacturing process of casting. The stress analysis of the cylinder assembly, carried out by means of finite element analysis, has also confirmed that the crack origin was located at the most stressed area of the cylinder assembly i.e. on the inner flange fillet of the exhaust side of the CH. ase study, together with the other recently reported, has definitely confirmed the repetitive and therefore systematic problems with the CH of air cooled, horizontally opposed, aircraft piston engines.