On the failure analysis of bondlines: Stress or energy based fracture criteria?

Bonded structure, can be either considered a multilayer material system, where its sublayers are held together through media that provide adhesion, or an adhesive joint designated for the assembly of different parts involved in a structure. For the assessment of the adhesion strength that characterizes a given bondline, both its cohesive strength and fracture toughness material parameters must be experimentally defined. Based on these properties, failure analysis of the bondline can be done either through stress- or energy-based criteria. The aim of this work is to investigate the effectiveness of each criteria type to effectively predict debonding initiation/propagation of different bondlines (brittle, quasi-brittle, ductile), which are eventually utilized for the evaluation of the joint’s failure load. By representing a bondline according to its cohesive length scale, an effort is made to classify the wide range of bondlines with respect to the failure theory that best describes the debonding process. Cohesive length scale effects are first demonstrated by modeling end notch flexure geometries and later by modeling double strap joint geometries within the framework of a wide numerical experimentation programme. Fracture initiation and propagation of the bondlines was numerically simulated by cohesive zone models.