Author/Authors :
Tivey، نويسنده , , R. and Ando، نويسنده , , T. and Antipenkov، نويسنده , , A. I. Barabash ، نويسنده , , V. and Chiocchio، نويسنده , , S. and Federici، نويسنده , , G. and Ibbott، نويسنده , , C. and Jakeman، نويسنده , , R. and Janeschitz، نويسنده , , G. and Raffray، نويسنده , , R. and Akiba، نويسنده , , M. and Mazul، نويسنده , , I. and Pacher، نويسنده , , H. and Ulrickson، نويسنده , , M. and Vieider، نويسنده , , G.، نويسنده ,
Abstract :
Over the period of the ITER Engineering Design Activity (EDA) the results from physics experiments, modelling, engineering analyses and R&D, have been brought together to provide a design for an ITER divertor. The design satisfies all necessary requirements for steady state and transient heat flux, nuclear shielding, pumping, tritium inventory, impurity control, armour lifetime, electromagnetic loads, diagnostics, and remote maintenance. The design consists of 60 cassettes each comprising a cassette body onto which the plasma facing components (PFCs) are mounted. Each cassette is supported by toroidal rails which are attached to the vacuum vessel. For the PFCs the final armour choice is carbon-fibre-composite (CfC) for the strike point regions and tungsten in all remaining areas. R&D has demonstrated that CfC monoblocks can routinely withstand heat loads up to 20 MW m−2 and tungsten armour >10 MW m−2. Analysis and experiment show that a CfC armour thickness of ∼20 mm will provide sufficient lifetime for at least 1000 full power pulses. The thickness of the cassette body is sufficient to shield the vacuum vessel, so that, if necessary, rewelding is possible, and also provides sufficient stiffness against electromagnetically generated loads. The cassette design provides efficient and proven remote maintenance which should allow exchange of a complete divertor within ∼6 months.
