Final test of the W7-X control coils power supply and its integration into the overall control environment

In order to be able to vary the magnetic configuration of WENDELSTEIN 7-X (W7-X) at the plasma edge and allow sweeping of the power across the divertor target Plates 10 “control coils” are installed inside the plasma vessel behind the baffle plates of the divertor. The coils are made of eight turns of a hollow copper profile. The dimensions of the coils are 2.05 m × 0.35 m × 0.35 m with a three dimensional shape to fit into the narrow space between the baffles and the wall of the plasma vessel. f the 10 coils is supplied by independent power supplies each providing bi-directionally a direct current of 2500 A with high accuracy and low ripple. ow sweeping the power deposition from the plasma across the target plates the power supplies provide an alternating current of up to 625 A with frequencies up to 20 Hz which is synchronised between the 10 supplies in order to maintain the symmetry of the magnetic field. tal output current of a power supply is a superposition of a direct current and an alternating current, where both parts have to be independently adjustable. power supply units and auxiliary systems have meanwhile been installed and finally tested at the W7-X site in Greifswald. per focuses on the results of the final tests and measures to integrate the power supply system to the overall control system including the central PLC and PCʹs for experiment control, data acquisition- and security systems.