Hydraulic numerical analyses of the IFMIF target performance

The target of the International Fusion Material Irradiation Facility (IFMIF) is one of the most crucial components of the planned facility, since due the high power densities only a free surface operated liquid lithium target is potentially capable to match the constraints set by the user community. Therefore in the design process two design options for such a free surface target have been elaborated. Both are analyzed by means of a time dependent large eddy simulation in this paper. alysis of the numerical data rapidly shows that not only the nozzle but also the flow straighteners installed upstream the two step acceleration nozzle impact the flow especially in the boundary layers of the duct flow domain. Those boundary layers formulate the inlet conditions into the technically relevant target domain. In general both target design options serve an acceptable film thickness in the irradiation area. However, the design option with a straight to curved back wall is less preferable than a design solution with an entirely curved back wall since the surface shape exhibits larger surface fluctuations and a higher fluctuation intensity although the thermal behaviour close to the back wall is marginally better than for the entirely curved option.