Effect of surface oxide layer on deuterium permeation behaviors through a type 316 stainless steel

Effect of surface oxide layer on the hydrogen isotope permeation was studied. Iron oxide was uniformly formed in the oxide layer, although chromium was limited at the interface between the oxide layer and bulk SS-316. The permeation behavior of deuterium for oxidized SS-316 was compared with that for unoxidized SS-316 at temperature range of 333–673 K. The deuterium permeability for the oxidized SS-316 was reduced 1/10–1/20 times as high as that for unoxidized one. However, the activation energy of deuterium permeation as gas form for oxidized SS-316 was almost the same as that for unoxidized SS-316 and was 0.64 eV, which was almost consistent with the sum of activation energies for diffusion and solubility. This fact indicates that the deuterium permeation is diffusion limited. The permeability of deuterium as water form was almost constant even if heating temperature is high, showing that the deuterium was permeated through bulk SS-316 and react with oxygen at the oxide layer as water desorption, which is controlled by the permeation flux of deuterium and oxygen concentration on the surface of oxide layer in downstream side.