Natural levee deposition during the 2005 flood of the Saskatchewan River

In summer 2005, a controlled flood of the Saskatchewan River (east-central Saskatchewan, Canada) resulted in general floodplain inundation and extensive natural levee deposition along a 60-km reach extending from 40 km below the E.B. Campbell dam to Cumberland Lake. Levee crests along channel banks were inundated for up to 7 weeks in some areas of the floodplain. New deposits on levee crests varied from 0 to 70 cm in thickness, displaying large variations both along reach and in opposing sites across channels. Mean grain sizes, mainly silt and very fine sand, likewise varied considerably among sample sites. nd post-flood surveys of channel cross sections along the flooded reach permitted assessments of relationships between channel-area changes and patterns of levee sedimentation in this system in which virtually all new flood sediment was derived by channel scour. Results show that both net deposition and net erosion occurred within the channel cross sections, but that on average, net channel enlargement of 4.2% prevailed over the entire survey reach when weighted by cross-section size. Over the 60-km flooded reach, zones of thick levee deposition occur at or just downstream of two areas of major channel enlargement, and an intermediate zone of thin levee deposits is associated with an intermediate area of net channel aggradation. This bimodal distribution of flood-deposit thickness is inferred to have resulted from differences in sediment supply produced locally by the different extents of channel-perimeter erosion. Two other factors—(1) position of interfacial zones between clear floodbasin water and turbid channel water, and (2) difference in pre-flood levee heights—contributed to the poor correspondence in thickness and grain size between opposing levees at some sites. Additional features of the new levee deposits, including increases in transverse slopes, abrupt basinward fining, and paucity of deposition in distal areas due to clear floodbasin waters, are characteristic of strong front loading that results when suspended sediment production is restricted to channel erosion processes.