Simulation of electromechanical and thermomechanical loads on first wall mock-ups

In order to study the boundary conditions for the occurrence of ratcheting, a testing rig was erected. In this rig, small-scale mock-ups of the first wall were tested under mechanical conditions similar to those expected during disruptions. These mock-ups were made of stainless steel AISI 316. They were heated on the surface and water cooled from inside. Disruption forces were simulated by a high-speed hydraulic bending system by impact loads. The mock-ups were heated by a high-frequency generator and cooled by water through two cooling channels. ition to the experimental work, simplified analytical analysis and numerical calculations were carried out using the finite element program abaques. In these calculations, the temperature and stress fields in the mock-ups were investigated and the influence of the different constitutive equations was studied. perimental results confirm the ratcheting behaviour predicted by the calculations. It has been demonstrated that the ratcheting behaviour for constant mechanical and cyclic thermal loads is much stronger than in the case when both loads are cyclic in nature.