Title of article
SPOT WELDING COPPER–1%Cr ELECTRODE TIPS PRODUCED VIA EQUAL CHANNEL ANGULAR PRESSING
Author/Authors
HUSSAIN, L. B. Universiti Sains Malaysia - School of Materials and Mineral Resources Engineering, Malaysia , ALJUBOURY, A.A. Garyounis University - Department of Physics, Libya , GEBRIL, M.A.M. , SHARIF, NURULAKMAL M. Universiti Sains Malaysia - School of Materials and Mineral Resources Engineering, Malaysia
From page
1
To page
10
Abstract
A sharp 120o Equal channel angular pressing (ECAP) following rout Bc was applied at room temperature to refine the grains sizes of pure copper and copper-1%Chromium alloy for spot welding electrode tips application. Initially deformation behavior was investigated with the position using colorful plasticine as work piece followed by copper alloy. It was found the deformation at the central part of the work piece is heavily sheared than the outer part. Optical and Scanning electron microscopy were used to study the progress of grain refining under the influence of rotation and number of passes during pressing. The influnece of elongated fibrous nano graines on electrical conductivity and hardness were discussed. Shear test of spot welded 303 stainless steel indicated that nano structural Cu-1%Cr electrode tips used showed a superior results compared to commercial electrodes
Keywords
Equal channel angular processing (ECAP) , Spot welding , Ultra , fine grains, Conductivity, Hardness
Journal title
IIUM Engineering Journal
Journal title
IIUM Engineering Journal
Record number
2558162
Link To Document