Title of article :
Thermo-mechanical Characterization of Insulating Bio-plasters Containing Recycled Volcanic Pyroclasts
Author/Authors :
Contrafatto, Loredana Department of Civil Engineering and Architecture - University of Catania, Italy , Gazzo, Salvatore Department of Civil Engineering and Architecture - University of Catania, Italy , Purrazzo, Antonio Material Testing Laboratory collaborator - University of Catania, Italy , Gagliano, Antonio Department of Electrical - Electronics and Computer Engineering - University of Catania, Italy
Abstract :
Aim:
The research proposes the reuse of volcanic wastes in the production of lightened and insulating bio-plasters.
Introduction:
The goal is the production of a novel sustainable construction material that reduces the environmental impact.
Methods:
Four mixtures were designed. The recycled Volcanic Ash was used in combination with two bio-compatible binders; basically Natural Hydraulic Lime (NHL) or calcium hydroxide blended with a commercial Portland cement (CH-CEM). To improve thermal properties, CH-CEM mixtures were treated with an Air Entraining Agent (AEA) in two different percentages and a breathable resin (R). The main physical, mechanical and thermal properties were experimentally determined.
Results:
The results of such analysis indicate that the mixture NHL, realized using hydraulic lime as a binder, do not satisfy the threshold of the water absorption coefficient, exceeding the limit established by UNI EN 998-1 standard.
Conclusion:
On the contrary, one of the mixtures CH-CEM, containing both AEA and R, is suitable for use as lightweight plastering mortar and also satisfies the requirements for insulating mortars.
Keywords :
Volcanic ash , Bio-composite , Thermal insulating plaster , Insulating panels , Etna , Bio-plasters , Volcanic pyroclsts , Eco-design
Journal title :
Open Civil Engineering Journal
