Title of article :
Potensi Penggunaan Sisa Buangan Cat Industri Automobil Dalam Penghasilan Konkrit
Author/Authors :
Md.Zain, Shahrom Universiti Kebangsaan Malaysia - Fakulti Kejuruteraan - Jabatan Kejuruteraan Awam dan Struktur, Malaysia , Ng Foo, Sun Universiti Kebangsaan Malaysia - Fakulti Kejuruteraan - Jabatan Kejuruteraan Awam dan Struktur, Malaysia , Roszilah, Hamid Universiti Kebangsaan Malaysia - Fakulti Kejuruteraan - Jabatan Kejuruteraan Awam dan Struktur, Malaysia
Abstract :
The objective of this study is to determine the effect of incorporating paint sludge bottom ash as cement replacement materials to the workability of fresh concrete and compressive strength of concrete. The paint sludge bottom ash is obtained from the incinerator plant of Perodua Manufacturing Sdn.Bhd,Sungai Choh, Rawang Selangor. Tests on the properties of the ash shows that the specific gravity is 2.50 and the specific surface of the ash particle is 829.82 cmllg. The heavy metals test shows that the highest concentration of heavy metals is barium, which is 144.18 mg/L followed by zinc, 16.96 mg/L and lead, 15.72 mg/L. Mean while,the content of CaD and Si02 found in the bottom ash are small. There are only 1.82% and 7.68%(weight in percent). The test on the properties of fresh concrete incorporating 10%,20% and 40% of the paint sludge bottom ash by weight shows that the slump of the concrete increases as the bottom ash percentage increases. Consequently, testonstrength showsthat compressive strength decreases asthe percentage of bottom ash replacing the amount of cement increases.The compressive strength (28th days) of the concrete incorporating 40% bottom ash experienced the maximum reduction (more than 50%) both for samples undergone wet orair-dry curing.
Keywords :
paintsludgebottom ash , concrete , heavymetals , curing , compressive strength