Title of article :
Investigation of the effects of the weld groove shape on the residual stress formation in the butt-welded plates
Author/Authors :
farahani, m. university of tehran - school of mechanical engineering, college of engineering, تهران, ايران , hakkak zargar, s. university of tehran - school of mechanical engineering, college of engineering, تهران, ايران , akbari, d. tarbiat modarres university - department of mechanical engineering, ايران
Abstract :
In this investigation, finite element technique and experimental method were utilized for analyzing the residual stresses created during the welding process of plates. In this way, a welded specimen was prepared with controlled welding parameters. Hole drilling technique was used to measure the residual stresses in some points of the welded specimen.To evaluate accuracy of the FE modeling, a comparison between experimental data and FE results was utilized and showed a good agreement. According to this study, the procedure of the FE modeling with acceptable accuracy was extended. This improved model was employed to investigate the influence of the groove shape on the remained stresses of welded plates. It was shown that the weld groove shape can affect the distribution of the remained stresses in thick welded plates, but it had no significant effect on peak stresses.
Keywords :
Remained stresses , Finite element technique , Butt , welded plate , Groove shape
Journal title :
Scientia Iranica(Transactions B:Mechanical Engineering)
Journal title :
Scientia Iranica(Transactions B:Mechanical Engineering)
