Author/Authors :
tan, p. c. xiamen university malaysia - school of energy and chemical engineering, Sepang, Malaysia , yiauw, d. y. universiti sains malaysia, engineering campus - school of chemical engineering, Nibong Tebal, Malaysia , teoh, g. h. universiti sains malaysia, engineering campus - school of chemical engineering, Nibong Tebal, Malaysia , low, s. c. universiti sains malaysia, engineering campus - school of chemical engineering, Nibong Tebal, Malaysia , jawad, z. a. curtin university malaysia - faculty of engineering and science - department of chemical engineering, Miri, Malaysia
Abstract :
Various methods have been explored to improve the gas separation performance of polyimide membrane for more viable industrial commercialization. Generally, polyimide membrane can be synthesized via two different methods: chemical imidization and thermal imidization routes. Due to the markedly different membrane synthesis conditions, the influence of imidization methods on the gas transport properties of resulting membrane is worthy of investigation. The polyimide produced from two imidization methods was characterized for its molecular weight. In overall, the molecular weight of thermally imidized polyimide was higher than that of chemically imidized one except ODPA-6FpDA:DABA as it was prone to depropagation at high temperature. It was observed that the chemically imidized ODPA- 6FpDA:DABA membrane possessed better gas separation performance than the thermally imidized counterpart. In particular, it showed 12 times higher CO_2 permeability (19.21 Barrer) with CO_2/N_2 selectivity of 5. After crosslinking, the CO_2/N_2 selectivity of the polyimide membrane was further improved to 11.8 at 6 bar of permeation pressure.
Keywords :
Chemical imidization , thermal imidization , CO_2 , N_2 separation , polyimide membrane , molecular weight
