Performance of Heat Recovery Cycle in order to Enhance Efficiency and its Mutual Effect on the Engine Performance with the Aid of Thermodynamic Simulation

Considering that the heat required for the Waste heat recovery (WHR) cycle of the engine is provided from two parts of the exhaust gas and the cooling system, the mutual influence of the WHR cycle on the engine performance is undeniable. Therefore, in this numerical study, an attempt has been made to thermodynamically evaluate the effect of the implementation of the WHR cycle on the engine efficiency. For this purpose, the 16 cylinder MTU 4000 R43L heavy diesel engine was simulated and a comparison was made between numerical and experimental results. Finally, the SRC heat recovery cycle was designed and applied in the simulated model according to the desired limits and the temperature range of the engine operation. At low speed with the application of the WHR cycle, the output net power did not drop much, but at the maximum speed and power, a power loss of about 4% is observed. At 1130 rpm, the power did not increase much. At 1600 rpm, the power increase is reduced to about 2.3%. At 1800 rpm, due to the significant increase in exhaust gas temperature, the total power value increased by about 4%.