An extended equivalent domain integral method for mixed mode fracture problems by the p-version of FEM

A new path-independent contour integral formula is presented to estimate the crack-tip integral parameter, J -value, for two-dimensional cracked elastic bodies which may quantify the severity of the crack-tip stress elds. The conventional J -integral method based on a line integral has been converted to an equivalent area or domain integral (EDI) by the divergence theorem. It is noted that the EDI method is very attractive because all the quantities necessary for computation of domain integrals are readily available in a nite el- ement analysis. The details and its implementation are extended to the p-version FE model with hierarchic elements using integrals of Legendre polynomials. By decomposing the displacement eld obtained from the p-version nite element analysis into symmetric and antisymmetric displacement elds with respect to the crack line, the Mode-I and Mode-II non-dimensional stress intensity factors can be determined by using the decomposition method. The example problems for validating the proposed techniques are centrally oblique cracked plates under tensile loading. The numerical results associated with the variation of oblique angles show very good agreement with the existing solutions. Also, the selective distribution of polynomial orders and the corner elements for automatic mesh generation are applied to improve the numerical solution in this paper.