Simulation of heat extraction from crystalline rocks: The influence of coupled processes on differential reservoir cooling

Processes operating during the extraction of heat from fractured rocks influence dynamically their fluid flow and heat transport characteristics. The incorporation of pressure- and temperature-dependent rock parameters, coupled with geomechanical deformation, is particularly important for predictive modelling of geothermal reservoirs hosted in crystalline rock masses. Changes in flow and transport parameters of fractures caused by variations in local effective stress are computed using an experimentally validated geomechanical model [McDermott, C.I., Kolditz, O., 2006. Geomechanical model for fracture deformation under hydraulic, mechanical and thermal loads. Hydrogeol. J. 14, 487–498]. Local effective stress changes are linked to alterations in reservoir fluid pressures, and to in situ stress conditions, including the buildup of thermal stresses resulting from the cooling of the rock mass. These processes are simulated using a finite-element model in order to study the behaviour of the Spa Urach (southwestern Germany) potential geothermal reservoir. The model couples mechanical deformation and alteration of fracture parameters with pressure-, temperature- and salinity-dependent fluid parameter functions. The effects of potential reservoir damage on reservoir productivity are investigated to help identify optimal heat recovery schemes for the long-term economical exploitation of geothermal systems. Simulation results indicate that preferential fluid flow paths and shortcuts may develop, depending on the mechanical and thermal stress releases that occur during intense exploitation of these systems. © 2006 CNR. Published by Elsevier Ltd. All rights reserved