Chromium doping as a new approach to improve the cycling performance at high temperature of 5 V LiNi0.5Mn1.5O4-based positive electrode

LiCr2YNi0.5−YMn1.5−YO4 (0 < Y ≤ 0.2) spinels have been synthesized by a sucrose-aided combustion method. Two sets of Cr-doped samples have been obtained by heating the “as-prepared” samples at 700 and 900 °C for 1 h. X-ray diffraction and thermogravimetric data show that pure and single phase spinels with similar lattice parameter have been synthesized. The homogeneity and the sub-micrometric particle size of the spinels have been shown by SEM and TEM. The main effect of the temperature is to increase the particle size from ≈50 to ≈500 nm, on heating from 700 to 900 °C. The study of the influence of Cr-dopant content and thermal treatment on the electrochemical properties at 25 °C and at 55 °C has been carried out by galvanostatic cycling in Li-cells. The discharge capacity (≈130 mAh g−1) does not noticeably change with the synthesis conditions; but the cycling performances are strongly modified. Key factors that control the cycling performances have been determined. The most highlighted result is that spinels heated at 900 °C with Y ≤ 0.1 have very high capacity retention at 55 °C (>96% after 40 cycles, cyclability >99.9% by cycle) indicating that metal doping is a new approach to prepare 5 V LiNi0.5Mn1.5O5-based cathodes with excellent cycling performances at high temperature.